DOI: 10.3390/catal14030202 ISSN: 2073-4344

Conversion of Biomass-Derived Tars in a Fluidized Catalytic Post-Gasification Process

Floria Rojas Chaves, Nicolas Torres Brauer, Cindy Torres, Hugo de Lasa
  • Physical and Theoretical Chemistry
  • Catalysis
  • General Environmental Science

The present study deals with the development, characterization, and performance of a Ni-based catalyst over a ceria-doped alumina support as a post-gasification step, in the conversion of biomass-derived tars. The catalysts were prepared using the incipient wetness technique and characterized chemically and physically using NH3-TPD, CO2-TPD, H2-TPR, XRD, Pyridine-FTIR, N2 physisorption, and H2-Pulse Chemisorption. It was observed that the 5 wt% CeO2 reduced the strong and very strong acid sites of the alumina support and helped with the dispersion of nickel. It was noticed that the nickel crystallite sizes and metal dispersion remained unchanged as the nickel loading increased. The performance of the catalysts was studied in a mini-fluidized CREC Riser Simulator at different temperatures and reaction times. The selected tar surrogate was 2-methoxy-4-methylphenol, given its functional group similarities with lignin-derived tars. A H2/CO2 gas blend was used to emulate the syngas at post-gasification conditions. The obtained tar surrogate conversion was higher than 75%, regardless of the reaction conditions. Furthermore, the catalysts used in this research provided an enhancement in the syngas product composition when compared to that observed in the thermal experiments. The presence of hydrocarbons greater than CH4 (C1+) was reduced at 525 °C, from 96 ± 3% with no catalyst, to 85 ± 2% with catalyst and steam, to 68 ± 4% with catalyst and steam-H2/CO2. Thus, the catalyst that we developed promoted tar cracking, tar reforming, and water-gas shift reactions, with a H2/CO ratio higher than 3.8, providing a syngas suitable for alcohol synthesis.

More from our Archive