Ameliorating the Interfacial Mismatch of SnO2 and Perovskite Enabling High Mechanical Stability for Flexible Perovskite Solar Cells
Chengyun Wang, Yue Jiang, Yihui Li, Zhengchi Yang, Zhengjie Xu, Cong Chen, Zhen Wang, Guofu Zhou, Jun-Ming Liu, Jinwei Gao- Electrical and Electronic Engineering
- Energy Engineering and Power Technology
- Atomic and Molecular Physics, and Optics
- Electronic, Optical and Magnetic Materials
SnO2 has been a widely used electron transport layer (ETL), due to its high electron mobility and stable chemical properties in n‐i‐p type perovskite solar cells (PSCs). However, the interfacial mismatch, especially on the residual strain and the different mechanical properties between SnO2 and perovskite films, leads to an obvious decrease in power conversion efficiency (PCE) and flexibility in the SnO2‐based PSCs. This limitation has severely hindered the large‐scale implementation of flexible perovskite solar cells (F‐PSCs). Herein, we have introduced polydopamine (PDA) in SnO2 as “depletion intermediary”, which has significantly improved the interfacial contact and mitigated the inherent brittleness of SnO2 film. The obtained PSCs have achieved a PCE of 22.70% and 21.04% based on the rigid and flexible devices respectively. Most importantly, the flexibility has been largely improved, that after 3, 000 bending cycles with a 5 mm bending radius, approximately 87% of its original efficiency has been retained.
This article is protected by copyright. All rights reserved.