Study of Laser Self-Heating Tapered Silica Microfibers in Air

Optical microfibers are fabricated by pulling classical silica fibers until reaching diameters of a few micrometers or less. These devices are significantly exploited in many science and engineering fields, ranging from fundamental research to practical applications. Despite their many attractive advantages, a major technological challenge remains: heating caused by laser absorption from surface defects and contaminants. In the present study, we propose, for the first time to our knowledge, a novel method to measure the temperature evolution of laser self-heated microfibers in air at a wavelength of 1.48 µm. This method, simple and fast, enables us to investigate the influence of the diameters and lengths of the microfibers. We found that the temperature of the microfibers increases linearly with the power and measured a rise of 70 °C for a 1 µm diameter and 20 mm length microfiber at a moderate power of 160 mW. A numerical model considering the microscale and the heat exchange with air is proposed and is adjusted with experimental data, providing values for the thermal transfer coefficient. By investigating power scaling, this work enables the prediction of temperature increases in self-heated microfibers in air, paving the way for new insights into the self-cleaning of microfiber-based devices and for optimized control of light propagation at high power levels.