Steam Explosion Processing of Bast Fibers: Effects on Fiber Structure and Performance in Textile and Composites Applications

In response to the increasing needs for environmentally friendly products, lignocellulosic natural fibers have been of interest as potential replacements for synthetic reinforcement materials in textiles, composites, and related applications. Among these resources, bast fibers derived from plant stems (flax, hemp, nettle, jute, hop), which contain a high cellulose content, have good mechanical properties, low density, and are renewable, are highly promising. Steam explosion has emerged as a green fiber extraction, defibrillation, and surface modification pretreatment technology. Despite the growing number of studies on steam-exploded natural fibers, a comprehensive understanding of the relationships between processing conditions, fiber modifications, mechanisms, and end-use performance remains limited. This review investigates the structural, chemical, and morphological influences of steam explosion on bast fibers. Specifically, it focuses on the mechanism of steam explosion including the solubilization of hemicellulose, partial lignin redistribution or removal, fiber individualization, and cellulose enrichment. The literature indicates that steam explosion can improve fiber separation, fineness, surface morphology, and interfacial adhesion of the composite materials and reduce the use of hazardous chemicals compared with conventional extraction methods. Nonetheless, conflicting results have also been documented, where the same steam explosion conditions can yield distinct fiber characteristics according to biomass type, composition of biomass, moisture concentration, and the amount of processing involved. Excessive treatment severity may lead to fiber shortening, cellulose degradation, and deterioration of fiber quality, particularly for textile applications requiring long fibers. This review highlights current knowledge gaps regarding the optimization of processing conditions, the understanding of steam explosion mechanisms, and the scale-up of the technology for industrial applications.