Relative Localization of a Floating Recovery Target in an Unmanned Surface Platform-Assisted UAV–ROV Search-and-Recovery System Under High Sea States

This study addresses target-to-ROV relative localization in an unmanned surface platform-assisted UAV–ROV search-and-recovery system. Because the submerged ROV is not assumed to be visible from the air, the UAV observes the floating target and a GNSS-equipped ROV-associated surface buoy in the same image. The buoy position and target-to-buoy image displacement are combined to construct a world-frame target-position measurement, whose covariance accounts for buoy GNSS uncertainty and correlated image-projection errors. An upward-looking ROV imaging sonar provides range–bearing measurements. A delay-aware extended Kalman filter fuses the asynchronous observations using sea-state- and confidence-dependent covariance adaptation and normalized-innovation gating. ROV acoustic/inertial navigation uncertainty is propagated into the sonar measurement covariance and the reported relative-state covariance, avoiding duplication of the same navigation error in the aerial channel. The method is evaluated using a JONSWAP-based temporal disturbance model, Monte Carlo simulations, and single-factor and joint sea-state–occlusion–delay sensitivity tests. Under the nominal sea-state-5 condition, the proposed method achieves a mean ROV-frame relative RMSE of 0.992 m, compared with 1.083 m for ROV-only localization and 1.054 m for fixed-covariance fusion, with no run exceeding the 5 m divergence threshold. The results demonstrate improved relative-localization robustness within the simulated environment.