Preparation of Si-Ca-Fe Ceramsite from Multiple Solid Wastes for Cd(II) Removal: Adsorption Performance and Mechanism

The increasing accumulation of industrial solid waste and worsening groundwater pollution pose significant environmental challenges. This study introduces a Si-Ca-Fe-based ceramsite from solid wastes with exceptional Cd adsorption capacity. A comprehensive investigation was conducted on the phase evolution, adsorption properties, and underlying mechanisms of the synthesized ceramsite. The findings revealed that the optimum sintering temperature for the ceramsite, characterized by austenite and pyroxene, was 1140 °C, which balanced mechanical strength and Cd adsorption capacity. Remarkably, the ceramsite (6.0 g) was immersed in 5 L of a Cd(NO3)2 solution for 21 h under initial conditions (pH = 7 and temperature = 20 °C), and the ceramsite exhibited a notable Cd adsorption capacity of 5.47 mg/g (initial Cd concentration: 53.42 mg/L), with a maximum theoretical capacity of 9.32 mg/g according to the Langmuir isotherm. An in-depth analysis of adsorption kinetics, phase composition, and EDS data indicated that the primary adsorption mechanism was the zero-valent iron (ZVI) corrosion-driven reaction. This ZVI formed in situ under reducing conditions during the ceramsite’s preparation and subsequently aided in the precipitation of Cd(OH)2. Additionally, the honeycomb structure of the ceramsite, containing fine pores (approximately 2–5 μm), enhanced physical adsorption via capillary action, further improving Cd removal. These insights offer a robust foundation for crafting efficient, solid waste-derived ceramsite tailored for heavy metal extraction from polluted water, presenting a compelling approach to concurrent waste recycling and environmental remediation.