Numerical Simulation of Segmented Multi-Cluster Fracture Propagation in Horizontal Wells of Sulige Tight Gas Sandstone

The pronounced heterogeneity of tight sandstone reservoirs in the Sulige Gas Field poses significant challenges to the uniform propagation of multi-cluster hydraulic fractures during horizontal well staged fracturing, often leading to uneven stimulation and compromised productivity. To address this issue, a coupled fluid–solid fracture propagation model based on the displacement discontinuity method (DDM) was developed, incorporating dynamic fluid distribution, rock deformation, and temporary plugging mechanisms. The model was validated against microseismic monitoring data from the Sulige field and subsequently employed to investigate the effects of reservoir heterogeneity—including porosity, permeability, and in situ stress—on multi-cluster fracture growth. Results indicate that permeability and stress heterogeneity exert the most significant influence on fracture non-uniformity, as reflected by increased coefficients of variation in fracture length. Engineering measures such as the use of high-viscosity guar gum fracturing fluids, variable perforation strategies (e.g., 6, 10, and 16 holes per cluster), and optimized temporary plugging parameters (timing of 0.5 with 12 balls) were shown to effectively mitigate these effects and promote more balanced fracture propagation. This study provides a quantitative framework for optimizing fracturing design in heterogeneous tight gas reservoirs and offers practical guidance for enhancing stimulation uniformity and gas recovery efficiency in the Sulige Gas Field.