Modification of Surface and Subsurface Properties of Additively Manufactured Inconel 718 Components Through Post-Process and Interlayer Machine Hammer Peening

Additive manufacturing (AM) enables rapid, near-net-shape fabrication with high material efficiency, but the resulting components often exhibit surface roughness, microstructural heterogeneity, and tensile residual stresses that reduce their performance. Machine hammer peening (MHP) is a mechanical surface treatment capable of modifying the surface integrity of AM components. It can be applied either as a conventional post-processing step after fabrication or as a hybrid interlayer treatment integrated into the build process. In this study, the effects of MHP process parameters and treatment strategies on wire-based laser metal deposition (LMD-w) Inconel 718 components were investigated, including the implementation of hybrid interlayer MHP. Surface topography, hardness, microstructure, and residual stresses were examined experimentally, while numerical simulations were developed to support the measurements and to characterize local contact conditions and plastic strain evolution during peening. The results show that MHP significantly reduces surface waviness and roughness, increases near-surface hardness, refines the microstructure, and introduces deep compressive residual stresses. Furthermore, hybrid interlayer MHP enhances the depth and uniformity of the modified layer by influencing the evolving microstructure during deposition. Standard forged Inconel 718 samples were also treated with MHP as a reference, showing comparable characteristics between the forged and AM components. These findings demonstrate that MHP is a versatile and effective modification technique for improving the performance and reliability of AM components, particularly when implemented as a hybrid interlayer treatment during the AM process.