LED-Based Polar Coded Wireless Quantum Optical Communications for 6G and Beyond

Wireless communication above 300GHz requires highly sophisticated analog circuit design due to severe frequency dependent ohmic losses. The complexity of such electronic hardware motivates exploring wireless quantum optical communication approaches even for the 6G “terahertz (THz) range” 300GHz,10THz. In this work, the classical radio frequency (RF)-based inner physical layer (PHY) transceiver blocks of channel coded wireless communication systems are replaced by wireless quantum optical transceiver blocks. Short range concepts employing LEDs as transmitters are particularly attractive, owing to their low implementation cost and practical simplicity. In contrast to laser based wireless quantum optical transmission over multipath channels, the quantum mechanical density operator ρ̲RX,[si,bi] and the transition probability γ(si,si+1) required by the quantum data detection must be revised accordingly. Furthermore, the novel interpretation introduced here, in which the extrinsic information is treated as a diversity branch rather than as an estimate of the a priori information, facilitates turbo equalization that still can accomodate varying a priori information. However, due to the limited uncoded transmission performance achievable with such systems, the incorporation of sophisticated channel coding schemes appears imperative. The authors therefore investigate the combination of sophisticated channel coding techniques, such as polar coding, with LED based wireless quantum optical transmission technologies. All numerical results assume a cryogenically cooled receiver front-end (approximately 10 K), yielding thermal noise levels. Operation at room temperature in the 6G THz range 300GHz,10THz would require an average number N¯α of thermal noise photon values of approximately 5 to 20, which is beyond the scope of this feasibility study. The results show that the proposed paradigm enables simple, robust, and practically viable wireless quantum optical communication systems with favorable transmission performance. Additional gains are achieved through iterative turbo equalization. The results also suggest that the proposed approach can pave the way toward robust and economically viable future communication solutions.