Laser-Induced Nanocarbon Films Enable Optical Sensor Based on Combined Photothermal and Piezoresistive Effect

This work presents an enhanced photomechanical optical sensor inspired by our previously reported bio-inspired uncooled infrared detector. Performance improvement is achieved by strengthening the interfacial bond between the photothermal dendrite—polydopamine nanoparticle (PDA NP)/polydimethylsiloxane (PDMS) composite—and the piezoresistive laser-induced nanocarbon film, with a flexible PDMS substrate that provides both thermal insulation and mechanical stability. The resulting sensor exhibits a responsivity of 51.6 W−1 under 808 nm irradiation, an order-of-magnitude enhancement over the unmodified device. Wavelength-dependent characterization (455–1550 nm) shows responsivity decreasing from 93.1 W−1 at 455 nm to 14.4 W−1 at 1550 nm, with response times on the order of seconds across this range. Extending this trend into the longer-wavelength region of blackbody radiation, the mechanism transitions to a predominantly bolometric mode. The device also demonstrates stable detection of several hundred microwatts and robust durability at 455 nm. These results validate interface engineering strategy as a viable pathway toward high-performance uncooled optical detection, advancing bio-inspired detectors from functional mimicry toward an application-ready platform. These findings confirm PDA NPs as effective photothermal converters primarily at shorter wavelengths, while the wavelength-dependent response suggests future tailoring of spectral sensitivity using long-wavelength-absorbing materials.