Investigation of Dredging Pattern Due to Changes in Jet Cross-Section

Sediment management is a significant part of decisions hydraulic engineers undertake as it has a direct bearing on the environment. Sediment dredging from around intake structures and reservoirs impose a high operating cost. Jets can efficiently remove large quantities of sediment at low operational costs. This study assesses the scouring pattern development by changing jet parameters to achieve maximum scouring conditions. Toward this end, scour holes induced by jets generated using the nozzles with four inner angles (30, 45, 60, 90-degree) are tested on a cohesionless sediment bed. The experimental results show that the inner nozzle angle, α, and the densimetric Froude number, F0, affect the scour pattern. This work illustrates that the scour hole dimensions grow with increasing α and F0. Based on the velocity measurements, for all range of jet discharges, the relative velocity Um/U0 is increased by 20-25% for the nozzle α=90° than for α=30°.