Influence of the Artificial Aging Heat Treatment Regime on the Cavitation Erosion Behavior of the AM50 Alloy

The use of bulk heat treatments to improve the resistance of the material structures to cavitation erosion remains an effective approach due to the beneficial modifications induced in the microstructure and physical-mechanical properties. Depending on the intensity of cavitation loading, various heat treatment regimes can be applied. Among these, artificial aging treatments are particularly suitable for non-ferrous alloys, especially aluminum, zinc, and magnesium-based alloys. The current study investigates the effect of artificial aging heat treatment performed at 250 °C with holding times of 12 and 24 h on the biodegradable magnesium-based AM50 alloy. Cavitation tests were carried out using the method with a stationary specimen on a standard vibratory device according to ASTM G32-2016 requirements. The analysis of cavitation-eroded surfaces through macro- and microstructural images, together with the interpretation of characteristic erosion curves and specific parameters (cumulative mass loss, erosion speed and cavitation resistance), revealed both similarities and significant differences governed primarily by surface hardness and microstructural features. Comparison with the initial (semi-finished) state and with previous studies on artificial aging treatments performed at 200 °C for 12 and 24 h confirms the similarly beneficial effect of the 250 °C aging regime on the cavitation erosion resistance of the AM50 alloy.