High-fidelity qubit control in a natural Si-MOS quantum dot using a 300 mm silicon on insulator wafer
Xander Peetroons, Xunyao Luo, Tsung-Yeh Yang, Normann Mertig, Sofie Beyne, Julien Jussot, Yosuke Shimura, Clement Godfrin, Bart Raes, Ruoyu Li, Roger Loo, Sylvain Baudot, Stefan Kubicek, Shuchi Kaushik, Danny Wan, Takeru Utsugi, Takuma Kuno, Noriyuki Lee, Itaru Yanagi, Toshiyuki Mine, Satoshi Muraoka, Shinichi Saito, Digh Hisamoto, Ryuta Tsuchiya, Hiroyuki Mizuno, Kristiaan De Greve, Charles Smith, Helena Knowles, Andrew RamsayWe demonstrate high-fidelity single qubit control in a natural Si-MOS quantum dot fabricated in an industrial 300 mm wafer process on a silicon on insulator wafer using electron spin resonance. A relatively high optimal Rabi frequency of 5 MHz is achieved, decoupling the electron spin from its 29Si environment. Tracking the qubit frequency reduces the impact of low-frequency noise in the qubit frequency and improves the TRabi from 7 to 11 μs at a Rabi frequency of 5 MHz, resulting in Q-factors exceeding 50. Randomized benchmarking returns an average single gate control fidelity of 99.5±0.3%. As a result of pulse-area calibration, this fidelity is limited by the Rabi Q-factor. These results show that a fast Rabi frequency and a feedback protocol enable high fidelity in these Si-MOS devices, despite the low-frequency magnetic noise.