Engineered Cementitious Composites with Super-Sulfated Cement: Mechanical, Physical, and Durability Performance
Shahin Zokaei, Hocine Siad, Mohamed Lachemi, Obaid Mahmoodi, Emircan Ozcelikci, Mustafa ŞahmaranThis study aimed to bridge a research gap by exploring the utilization of super-sulphated cement (SSC) in engineered cementitious composites (ECCs) as a sustainable alternative to ordinary Portland cement (OPC)-based mixtures. The SSC was designed with slag, gypsum, and a small amount of OPC. The primary objective was to investigate the effects of incorporating SSC, both with and without fly ash (FA), at various FA/SSC ratios between 0 and 1.5. A comprehensive evaluation was conducted to assess the performance of the ECC-SSC mixtures, including the compressive and flexural strengths, ductility, ultrasonic pulse velocity, rapid chloride permeability, and drying shrinkage. Additionally, advanced microstructural evaluation techniques such as scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis as well as X-ray diffraction (XRD) analysis were employed to analyze the reaction products in selected mixtures. The results showed that the ECC mixture produced with SSC exhibited comparable strength to the ECC-OPC. In general, all the SSC-based ECCs fulfilled the criteria for various engineering applications, especially when the fly ash to SSC ratios were 0 and 0.8. In addition, ECCs with FA/SSC ratios of 1.2 and 1.5 showed ultra-ductile performance higher than the control ECC. Interestingly, all the FA-based ECC-SSC presented lower shrinkage characteristics than the control OPC-based ECC.