Effect of Pore Structure Parameters on Thermal Insulation Performance of Porous Ceramics Fabricated by Material Jetting

Porous ceramics have shown great application potential in aerospace, electronics, and lithium-ion battery thermal management due to their low density, high specific strength, and excellent thermal insulation. Material Jetting (MJ), a high-precision 3D printing technology, enables the fabrication of porous ceramics with tailored pore structures, but the synergistic effects of pore structure parameters (configuration, porosity, and number of periods) on their thermal insulation performance remain insufficiently explored. This study systematically investigates the thermal insulation behavior of zirconia porous ceramics fabricated by MJ through experimental tests and numerical simulations. Three typical lattice configurations (Octet, Schwarz, and Gyroid) were selected, and samples with varying porosities (40%, 50%, 60%) and numbers of periods (1, 2, 3) were prepared. The results indicate that the Octet configuration (60% porosity, 3 periods) exhibits the optimal thermal insulation performance, with a minimum cold-end temperature of 58.5 °C (experiment) and 59.21 °C (simulation), attributed to its strut-based structure that forms a more tortuous heat conduction path. For the Gyroid configuration, thermal insulation performance improves with increasing porosity (reducing solid conduction dominance under non-forced convection) and decreases with decreasing number of periods (due to inhomogeneous pore distribution extending heat transfer paths). Notably, the trend of porosity affecting thermal insulation is opposite to that of compressive performance. Numerical simulation results are consistent with experimental data in both values and trends, verifying the reliability of the model. This work clarifies the key factors regulating the thermal insulation of MJ-fabricated porous ceramics and provides practical structural design guidelines for applications such as lithium-ion battery thermal runaway management.