DOI: 10.1002/apj.3090 ISSN: 1932-2135

Effect of concave‐wall jets with circumferential multi‐inlet on liquid–solid separation

Jing Zhang, Zhexuan Jiang, Wenhao Hou, Aibo Jian, Yaxia Li, Zhiguo Tian, Bin Gong

Abstract

This study combined numerical simulation and experiment to explore the influence of the concave‐wall jets with uniformly distributed tangential inlets in the cyclone separator on the liquid–solid separation characteristics and equipment. The results show that as the number of tangential inlets increases, the superposition effect of particle trajectories and flow fields becomes more significant. The superimposed flow field enhances the circumferential flow velocity of the fluid, causing the distribution of the jet along the radial and spanwise directions to shrink, greatly improving the uniformity of particle distribution and turbulent kinetic energy along the circumference, and effectively reducing the impact of particles on local areas near the jet inlet. Since the superposition of circumferential multi‐inlet jets enhances the swirling flow, the local disturbance and wall erosion effects near the jet inlet were reduced. Compared with double inlets, the flow rates of three inlets and four inlets were increased by 50% and 100%, respectively, the maximum turbulent kinetic energy increased by 14.5% and 56.2%, and the maximum escape time of particles was shortened by 3.2 and 3.3 s, respectively, the maximum erosion rates were reduced by 38.4% and 23.6%, respectively, and the separation efficiency and material handling capacity were significantly improved. This study supplemented the theory of concave‐wall jets' superposition characteristics and provided a theoretical basis for applying circumferential multi‐inlet devices in liquid–solid separation equipment.

More from our Archive