Design and Optimal Sizing of a Photovoltaic/Wind/Diesel/Battery Nanogrid Using Different Multi-Objective Enhanced Algorithms: Application to a Residential Off-Grid Site in Algeria

This study considers the multi-objective optimization of a standalone hybrid nanogrid system (HNGS) providing electricity power to a residential load in an off-grid area of Djelfa Province, Algeria. The focus of this study is to obtain the optimum design of a standalone hybrid nanogrid system consisting of photovoltaic (PV) panels, wind turbines (WTs), battery storage (BT), diesel generators (DGs), and power converters to satisfy the energy demand of residential consumers in Djelfa Province, Algeria. In this context, four multi-objective optimization algorithms (MOPs), NSGA-II, MOPSO, MOSSA, and MODE, are used to solve the optimal sizing problem of the proposed system. The formulated multi-objective optimization problem takes into account multiple performance criteria such as cost of energy (COE), loss of power supply probability (LPSP), renewable energy penetration, and diesel generator usage reduction, balancing economic, reliability, and sustainability aspects. The optimization process optimizes critical design parameters, including the size of the PV system, the number of wind turbines, and the size of the battery storage system, for a realistic operating scenario. The optimization algorithms are combined with an energy management strategy (EMS) that helps to coordinate the power flow distribution between various parts of the system to achieve optimum system performance. The effectiveness of each of the proposed approaches is analyzed based on the obtained results, where it was found that the MODE algorithm provides the best compromise solution, with a COE of 0.167 USD/kWh and an LPSP of 6.372%, and the lowest carbon dioxide emissions of 205.1 kg/year compared to MOPSO, NSGA-II, and MOSSA. Moreover, the results obtained from this process will provide a set of feasible design solutions, which will allow decision-makers to choose the most suitable design solution based on technical and economic specifications.