Deformation and Failure Mechanisms of Extra-Deep Carbonate Rocks Under In Situ Conditions: An Experimental Study

The exploration of oil and gas resources is shifting toward ultra-deep and extra-deep reservoirs, including in the Tarim Basin, where various types of carbonate rocks are buried. Owing to the extreme burial depths, the mechanical behavior of these rocks under extra-deep conditions differs significantly from that of shallow formations, making it essential to understand their mechanical responses. This study investigated the mechanical properties and failure modes of carbonate rocks, specifically dolomite, argillaceous limestone, and pure limestone. Samples from extra-deep formations were initially analyzed for mineral composition and microstructure, after which uniaxial and triaxial compression tests were conducted to evaluate strength, static elastic modulus, and axial strain at peak stress. The results indicate that dolomite exhibits the highest mechanical strength and stiffness among the three lithologies. Under conditions of a high confining pressure of 100 MPa and a temperature of 160 °C, its elastic modulus and triaxial compressive strength are 65.4 GPa and 611.2 MPa, respectively, compared with 52.8 GPa and 444.2 MPa for limestone. Strength increases with confining pressure for all lithologies, with dolomite showing the most pronounced strengthening response. Although elevated temperature reduces rock strength, its effect is weaker than that of confining pressure. The failure mode is strongly controlled by confining pressure. At low confining pressures, failure is dominated by localized shear bands and brittle fracturing, whereas increasing confining pressure promotes a transition toward quasi-brittle deformation or ductile plastic flow. Dolomite predominantly maintains a quasi-brittle failure mode, argillaceous limestone exhibits a clear brittle-to-ductile transition, and pure limestone shows the greatest tendency to develop ductile plastic flow under high confining pressure conditions. The results further demonstrate that mineral composition and microstructural characteristics play critical roles in controlling the deformation and failure mechanisms of carbonate rocks. High-calcite pure limestone can exhibit ductile-like deformation behavior due to cataclastic processes, allowing significant strain without localization failure. These insights enhance understanding of carbonate rock behavior under extra-deep formations, informing practical applications in geology science.