Coatings Adhesion on Chemically Modified Scots Pine (Pinus sylvestris L.) Woods
Adefemi Adebisi Alade, Christoph Hoette, Holger Militz- Forestry
Synergizing coating and wood modification is a promising concept to develop wood products that have multi-qualities that include excellent dimensional stability, durability, and weathering resistance. However, the nature of the modified substrate is a critical parameter for coating adhesion. Chemical modification of wood impacts the physicochemical properties of the wood, which could in turn impact the adhesion of coatings. Therefore, this study investigated the adhesion of seven different coatings to Pinus sylvestris L. woods chemically modified through esterification with acetic anhydride (acetylated), etherification with 1.3-dimethylol-4.5-dihydroxyethyleneurea (DMDHEU), and esterification with sorbitol/citric acid formulation (SorCA). The selected coatings include water-based and solvent-based examples with different binder constituents that include acrylate, alkyd, natural oil, and hybrids. Coating adhesion to the modified wood was evaluated in terms of crosscut resistance to detachment, wear-resistant hardness, and pull-off strength. Chemical modifications yielded positive impacts on coating adhesion compared to unmodified wood. Coatings adhered better to acetylated and DMDHEU-modified P. sylvestris wood than on SorCA-modified wood. Solvent-based coatings had higher adhesion strength on the acetylated, DMDHEU-modified, and unmodified woods than water-based coatings. On the other hand, water-based coatings mostly adhered better to SorCA-modified wood compared to solvent-based coating. Overall, the coating of chemically modified P. sylvestris wood is promising for the development of an enhanced wood protection system.