The criteria for selecting materials for railway pavement (particle size distribution, California Support Index, and physical indexes) are not suitable for evaluating the hydraulic behavior of tropical soils under unsaturated conditions, often resulting in the rejection of soils with good mechanical and hydraulic performance. The railway trackbed is exposed to precipitation, allowing water infiltration into the pavement layers and consequently leading to moisture variation. Therefore, the present study aims to assess the moisture variation over time in the railway trackbed when subjected to the action of rainfall. For this purpose, five soils were analyzed as constituent materials of the subballast, with the infrastructure of the Carajás Railway in Brazil being used as a reference. Water retention curves and conductivity tests were conducted using the HYPROP (Hydraulic Property Analyzer) and WP4-C (Water Potential Four) equipment, and numerical modeling was developed using the IVFlow software. The numerical modeling revealed that sample 1 (lateritic sand) performed better compared to the other analyzed soils, as it exhibited lower moisture variation (3.25% above the optimum content) under the influence of rainfall and it also had low permeability.

More from our Archive

• DOI: 10.3390/app13148275 2023

  A Brief Review of Machine Learning Algorithms in Forest Fires Science

  Ramez Alkhatib, Wahib Sahwan, Anas Alkhatieb, Brigitta Schütt

• DOI: 10.3390/app13137783 2023

  Identification of Subsurface Mesoscale Crack in Full Ceramic Ball Bearings Based on Strain Energy Theory

  Xiaotian Bai, Zhaonan Zhang, Huaitao Shi, Zhong Luo, Tao Li

• DOI: 10.3390/app13148122 2023

  A Survey on Formal Verification and Validation Techniques for Internet of Things

  Moez Krichen

• DOI: 10.1063/5.0153716 2023

  Peristaltic transport of MHD Ree–Eyring fluid through a flexible channel under the influence of activation energy

  M. Ajithkumar, P. Lakshminarayana, K. Vajravelu

• DOI: 10.3390/app13137744 2023

  New Trends in 4D Printing: A Critical Review

  Somayeh Vatanparast, Alberto Boschetto, Luana Bottini, Paolo Gaudenzi

• DOI: 10.3390/app13148175 2023

  Boiling vs. Microwave Heating—The Impact on Physicochemical Characteristics of Bell Pepper (Capsicum annuum L.) at Different Ripening Stages

  Remigiusz Olędzki, Joanna Harasym

• DOI: 10.1063/5.0158292 2023

  On the propagation of cnoidal wave and overtaking collision of slow shear Alfvén solitons in low <b> <i>β</i> </b> magnetized plasmas

  Salemah A. Almutlak, Shahida Parveen, Shahzad Mahmood, Anisa Qamar, B. M. Alotaibi, S. A. El-Tantawy

• DOI: 10.1063/5.0156571 2023

  Optimization of painting efficiency applying unique techniques of high-voltage conductors and nitrotherm spray: Developing deep learning models using computational fluid dynamics dataset

  Mohammad-Reza Pendar, Sílvio Cândido, José Carlos Páscoa

• DOI: 10.1063/5.0156543 2023

  Assessment of the aerodynamic benefits of collocating horizontal- and vertical-axis wind turbines in tandem using actuator line model

  Yixiao Shao, Jie Su, Yu Tu, Limin Kuang, Zhaolong Han, Kai Zhang, Dai Zhou

• DOI: 10.1063/5.0155532 2023

  Couple stress fluid flow enclosing a solid sphere in a porous medium: Effect of magnetic field

  Pankaj Kumar Maurya, Satya Deo, Deepak Kumar Maurya