DOI: 10.1177/1475472x241230651 ISSN: 1475-472X

A space marching method for sonic boom near field predictions

Hao Shen, David S. Lazzara

The conventional sonic boom propagation prediction method widely adopted in supersonic aircraft design involves a two-step procedure. In the first step, a compressible viscous or inviscid Computational Fluid Dynamics analysis is applied to the aircraft geometry at flight conditions to produce a flow field solution near the aircraft. Then in the second step, a one dimensional nonlinear Burgers’ equation model is used to propagate sonic boom signature traces from the near field solution at flight altitude to the ground along a ray path. For an accurate ground signature prediction the near field signature must be accurately modeled at a sufficient distance from the aircraft flight path in order to minimize errors in the one dimensional propagation model. This is a very challenging task for general purpose CFD tools in a design environment because the cost of maintaining highly accurate off-body solutions increases dramatically as the radial distance is enlarged in the computational domain. It is also particularly difficult to apply these tools for wave propagation because the algorithms are normally lower order and numerically dissipative and dispersive. In this work a space marching procedure based on an optimized higher order finite difference method is developed and applied in conjunction with a CFD solution concentrated in the close vicinity of the aircraft. This new approach is much more efficient, compared to previous methods, in providing highly accurate near field signatures for full carpet ground predictions. Results indicate that near field signatures retain more waveform shape information farther from the aircraft geometry while reducing the CFD cost significantly. The predicted ground signature is also shown to converge in shape as the radial distance of the near field signature grows, which is indicative of a more ideal initial condition being supplied to the one dimensional wave propagation to ground. This feature is very difficult to replicate in a tractable manner with common CFD approaches used in design.

More from our Archive