Integrating Fusion Strategies and Calibration Transfer Models to Detect Total Nitrogen of Soil Using Vis-NIR Spectroscopy

Visible near-infrared (Vis-NIR) spectroscopy is widely used for rapid soil element detection, but calibration models are often limited by instrument-specific constraints, including varying laboratory conditions and sensor configurations. To address this, we propose a novel calibration transfer method that eliminates the conventional requirement of designating ‘master’ and ‘slave’ devices. Instead, spectral data from two spectrometers are fused to create a master spectrum, while independent spectral data serve as slave spectra. We developed an ensemble stacking model, incorporating partial least squares regression (PLSR), support vector regression (SVR), and ridge regression (Ridge) in the first layer, with BoostForest (BF) as the second layer, trained on the fused master spectrum. This model was further integrated with three calibration transfer methods: direct standardization (DS), piecewise direct standardization (PDS), and spectral space transfer (SST), to enable seamless application across slave spectra. Applied to soil total nitrogen (TN) detection, the method achieved an R2P of 0.842, RMSEP of 0.017, and RPD of 2.544 on the first slave spectrometer, and an R2P of 0.830, RMSEP of 0.018, and RPD of 2.452 on the second. These results demonstrate the method’s ability to simplify calibration processes while enhancing cross-instrument prediction accuracy, supporting robust and generalizable cross-instrument applications.